No products in the basket.
Two Hour Gloss Paint
From: £12.19
Quick drying, high gloss paint for wood, metal and many other surfaces. A decorative and protective topcoat for interior and exterior use.
- Ideal for structural steelwork, woodwork, machinery, gates, railings and guttering
- Use over selected Palatine primers and undercoats or directly onto painted surfaces
- Touch dry in 2 hours
- Durable long term protection
 
Shop with confidence:
Two Hour Gloss Paint is a high gloss, fast drying, protective and decorative top coat for interior and exterior use. This professional gloss gives long term, durable protection with a high gloss finish to a variety of surfaces. If you’re looking for the best quick dry gloss paint to apply by brush or roller, then Two Hour Professional Gloss has to be your choice. Because it is suitable for wood, metal and many other surfaces, it is ideal for restoration projects, structural steelwork, machinery, railings, pipework and more.
Two hour gloss is a high gloss enamel paint that dries to a hard finish. It is touch dry in 2 hours, which gives you excellent wet edge and flow out.
Highlights:
- Suitable for both interior and exterior use
- For metal, wood and many other substrates
- Based on vinyl toluene modified alkyd resin, (lead free) containing organic and inorganic pigments
- Solvent-borne
You can use two hour gloss paint over selected primers and undercoats from Palatine’s range. You can also apply it over previously painted surfaces. Best applied by brush or roller, but it can also be sprayed (dilute with no more than 10% white spirit). This high gloss, fast dry enamel paint has been used in many projects local to us here at Palatine Paints. Take a look at our Blog: Two Hour Gloss in Action at Leigh Spinners Mill. You can also see this paint used in many parts of the Lancashire Mining Museum
Please note: The colours shown here are only a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently.
Colours Available: BS 381C, BS4800 and Ral Classic range.
Pack Sizes: 1 Litre, 2.5 Litre, 5 Litre, 20 Litre
Coverage / Drying Times:
Surface Dry: 2 hours
Hard Dry: 8 hours
Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Product Documents
MSDS
6 reviews for Two Hour Gloss Paint
Add a review
Related products
Farm Oxide Paint
From: £13.01
Solvents & Thinners
From: £5.19
Bitumen Paint
From: £11.81
Decorative Paint
From: £9.14
Industrial Paint
From: £13.26
Epoxy Floor Paint
£99.00
Garden Gate Paint
From: £9.00
Industrial Paint
From: £16.17
J A Hewetson (verified owner) –
I used two hour gloss paint in Traffic Orange for a machine refurbishment, dry’s to a flat shiny finish, I wish I hard used Palatine primer from the start due to my normal primer bleeding through. I found that the orange needs at least two coats.
David Ritchie (verified owner) –
Applied to a building roof in late Autumn and now coming out of the winter it is still looking like applied last week. The strong glossy surface finish which appears to resist dirt and tree residue as well as bird dropping adhesion on surface. Planning to complete other work with the same gloss.
Clare –
Really easy to apply, sticks really well and has a beautiful, tough glossy finish. I have used the black on the metal support of an outdoor table and even on ceramic plants pots. Great stuff!
Kulbinder Bhamra (verified owner) –
I purchased the RAL 7016 Anthracite Grey for my garage door. A decorator has painted the door using a grey undercoat and it looks absolutely fabulous. So happy with the finished look. Thanks palatine
Adrian (verified owner) –
I used the olive green RAL6003 on our camper van and very pleased as I only used a gloss roller and and brush .. this paint flattens out and brush marks disappear once it starts to dry and leaves a great finish
joseph fearns –
Hi, I used RAL7106, anthracite grey, on my fence. Easy to use, great looking finish. Customer service was very good during difficult times. (Editor Note actual product used by customer was Palatine Professional Satin