No products in the basket.
Polyurethane Gloss Varnish
From: £11.24
A hard wearing, durable gloss finish polyurethane varnish which will seal and protect wood.
- Specially formulated for toughness and flexibility
- Hard wearing – great for use on heavily used surfaces
Shop with confidence:
Palatine Paints polyurethane gloss varnish uk manufactured, is a protective finish, which seals and protects a variety of surfaces. Protects your wood work from knocks, heat, scratches and chemical spills. Use to brighten up colours and protect previously coated surfaces. Easy to use, high performance, protective varnish choice for high traffic areas. As well as wood, it can be used on: concrete; stone; slate; metal and other composite materials. You’ll need to apply a minimum of two coats. Apply polyurethane gloss varnish with a suitable brush or roller or conventional and airless spray. We suggest sanding down between coats.
Take a look at our Floor Varnish and Yacht Varnish for specific varnishing projects.
We are proud to be a member of the British Coatings Federation.
Colours Available: Clear.
Pack Sizes: 1 Litre, 2.5 Litre, 5 Litre.
Coverage / Drying Times:
Surface Dry: 3 hours
Hard Dry: 8 hours
Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease etc.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces.
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
A minimum of two coats is recommended on bare wood to optimize the coatings performance.
Product Documents
4 reviews for Polyurethane Gloss Varnish
Add a review
Related products
From: £48.20
Wood Protection
From: £11.07
Polishes & Shellacs
£6.92 exc VAT | £8.30 inc VAT
Farm Fence Paint
£91.65 exc VAT | £109.98 inc VAT
Door Oil
From: £6.63
Wood Protection
From: £8.59
Decorative Paint
From: £8.39
Door Oil
From: £2.09
Maria –
Product as described. Looks great and enhances wood. Different drying times depending on type of wood.
Colin Day (verified owner) –
2.5 Lt can arrived as promised and all transit catches in place despite delayed journey due to Corvid 19 interruption. Varnish moderately quick drying.
Catherine Hughes –
Perfect, exactly as described
Susan Gould –
It’s amazing, it was the best thing I ever bought I used it on my bathroom floor as it was dull now it’s shinny and looks amazing can’t believe it like I’ve had new floor