No products in the basket.
Palatine Professional Matt Finish | Flat Oil Enamel
From: £9.08
Solvent-borne, oil based, flat matt finish enamel used as a decorative top coat for interior and exterior use.
- Provides a durable long term protection
- Suitable for wood, metal and other surfaces
- Unique delayed “wet edge” time allows for ease of use to produce a desired finish for internal and external woodwork and metal and other surfaces
- Touch dry in 3 hours
- Also available in Anthracite Grey RAL 7016
Shop with confidence:
Product Description
Palatine Professional Flat Oil Enamel is a solvent-borne, matt, flat oil enamel. It is formulated as a decorative top coat whilst also providing durable long term protection. Suitable for interior and exterior use for wood, metal and other surfaces.
Often referred to as ‘matt black’ our flat oil enamel is also available in colour with our facility to match to RAL / BS colour codes. Because you can use it on both woodwork and metal, it’s great for coordinating. Use on a variety of different surfaces such as skirting boards, window frames, radiators etc. Can also be used for exterior wood and metal surfaces.
Not sure about the differences between various finishes? The British Coatings Federation has a good overview here.
Palatine Professional Flat Oil Enamel produces a stylish and contemporary matt finish for wood and metal surfaces. It is also available in satin and as a gloss finish.
- Based on modified alkyd resin, (lead free) containing organic and inorganic pigments
- Touch dry in 3 hours
- Excellent wet edge and flow out
- Also available in Anthracite Grey RAL 7016
If you’re after a hard wearing, non reflective appearance then Palatine Professional Flat Oil will be a good choice. For a more reflective appearance, try satin finish or gloss finish.
Please note: The colours shown here are only a guide. This is due to the fact that every computer monitor has a different capability to display colours and that everyone sees these colours differently.
Colours Available: BS 381C, BS4800 and Ral Classic range.
Pack Sizes: 500 ml, 1 Litre, 2.5 Litre, 5 Litre.
Coverage / Drying Times:
Surface Dry: 3 hours
Hard Dry: 8 hours
Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
5 reviews for Palatine Professional Matt Finish | Flat Oil Enamel
Add a review
Related products
Decorative Paint
From: £9.14
Decorative Paint
From: £6.29
Garden Gate Paint
From: £9.00
Agricultural
From: £5.90
Bitumen Paint
From: £12.59
From: £11.57
Epoxy Floor Paint
£99.00
Industrial Paint
From: £13.26
tony eyre (verified owner) –
used for a panelled internal wall, wanted a matt finish, this is superb quality paint, and i mean better than dulux , crown, johnsons ETC…. super quick delivery…. Wonder if they can match farrow and ball colours?
Nicholas Garner (verified owner) –
Great service and great product. Coverage is good and finish is matt in the extreme, just what I wanted. Drying time (18ºC) quicker than suggested and “unique delayed wet edge” didn’t seem to make much difference, so best to apply quite quickly. I painted a staircase and, as expected, the finish shows scuff marks, although this tendency seems to reduce as the paint hardens over time. Cleaning with warm soapy water does not affect the matt finish. I’ll use this again.
John D Wantling –
Solid oil based paint for exterior use. Done my drain pipes in matt black, which has a mild eggshell finish. Excellent paint. Use it all the time. My decorator loves it.
Alexandra Rearie (verified owner) –
Fabulous product. Painted my £25 Facebook bargain buy wooden swing with it. Looks fantastic in the Matt black and should last for years.
Frederick S (verified owner) –
Absolutely excellent product!