No products in the basket.
Garage Floor Paint
From: £21.03
Palatine Garage Floor Paint is a commercial use paint. A hard wearing, durable, single pack floor paint suitable for use on mature concrete and metal. As standard comes in a smooth finish but Anti Slip garage floor paint is available.
Product Documents
Download
Shop with confidence:
Palatine Garage Floor Paint is a hard wearing, durable, floor paint suitable for use on mature concrete and metal. As standard comes in a smooth finish but an Anti-Slip garage floor paint finish is available on request.
A solvent based product, meaning it has a high performance finish – keeping your garage floor protected and looking good, a perfect choice for internal floors. With it being an easy clean floor paint it is ideal for small domestic areas.
Currently we have eleven stock colours although we have the ability to colour match to RAL classic codes this is a perfect protective, visually appealing coating. As well, if you’re wanting a specific shade please contact us or use our online chat facility.
Keypoints:
- For a more hard wearing surface we always recommend two coats
- A quick and easy product to apply
- With good application and flow properties enable brush, roller or spray application
- Solvent borne, touch dry in 3 hours. Overcoat after 24 hours
Anti Slip texture is the same product as the garage floor with anti slip additives added in, people use this textured finish for floors such as Kennels.
Suitable for foot traffic after 24 hours and heavier traffic after 72 hours
Colours Available: Floor Paint Standard Colours. Ral, Bs 381C, Bs4800,
Pack Sizes: 2.5 Litre, 5 Litre, 20 Litre, 205 Litre.
Coverage / Drying Times:
Surface Dry: 3 hours
Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Surface Preparation –
Bare Concrete:
Do not apply to newly laid concrete. Surfaces to be coated should be at least 4 weeks old and have a moisture content of less than 8%. They should also be free from any contaminants or surface laitance (a weak dusty layer on concrete). Traces of grease or oil can be removed using Palatine M.P Thinners.
Very smooth concrete or concrete with surface laitance should be treated with Concrete etching fluid to ensure good adhesion. Treated areas should be thoroughly washed down and allowed to dry before coating.
Painted Surfaces
Floor paints typically have poor adhesion to power floated concrete. Power floated floors must be either blast
treated or chemically etched prior to the use of Carbotread Floor Paint.
Painted Surfaces & Asphalt
Smooth & previously painted surfaces should be thoroughly abraded by sanding to improve adhesion and to remove any weak or loose material. It is advisable to test the coating on a small area first to check compatibility with previous coatings and adhesion. New asphalt should be sand rubbed when laid.
Surface Preparation – Wooden Floors
Sand down the surface where necessary to remove any existing coatings and loose material. Remove all dust and ensure surfaces are clean and dry before application of the coating. Seal any knots with a clear knotting solution.
Mixing Mix thoroughly for approx. 2 mins using a wide bladed stirrer. A wooden batten at least 25mm wide is ideal.
For anti-slip surfaces ensure the Texturing agent is evenly dispersed throughout the mix.
Best results are obtained in warm (minimum 15°C), dry conditions with a good through draught.
Apply using a brush and/or long pile, double arm roller.
On bare concrete floors it is recommended that the first coat be diluted with up to 20% White Spirit by volume prior to application. This will help seal the concrete surface. Once dried, a second coat can be applied at full strength.
On previously painted floors it is recommended that two thin coats be applied rather than one thick coat. This will prolong the life and performance of the coating. For wooden flooring allow to dry thoroughly before applying a second coat, if required.
Thinning and Cleaning: Use Palatine White Spirit.
Be the first to review “Garage Floor Paint”
Related products
Milking Parlour Wall Paint
From: £30.86
Driveway Paint
From: £27.30
Epoxy Floor Paint
From: £55.86
Industrial Paint
From: £13.26
Floor Paint & Coatings
£18.38 exc VAT | £22.06 inc VAT
Farm Oxide Paint
From: £5.90
Floor Paint & Coatings
From: £12.92
Decorative Paint
From: £10.35
Reviews
There are no reviews yet.