No products in the basket.
Boat & Barge Professional Gloss
From: £12.43
Boat & Barge Professional Gloss is a high gloss solvent-borne protective finish formulated as a decorative, protective top coat. It is ideal for use on narrow boats, canal barges and other vessels. We have a wide range of colours available, with colour matching to the RAL Classic or BS 381c/4800 colour charts also available.
- Provides durable, long term protection
- Suitable for wood, metal and other surfaces. Ideal for decoration of narrow boats and barges
- Touch dry in 2 hours, providing excellent wet edge and flow out
- Best applied by brush or roller but can also be sprayed
Boat & Barge Professional Gloss can be used as a final coat over selected primers and undercoats from Palatine’s wide range or on previously painted surfaces.
Click Here for accessory bundle
See below for more information or contact us
Shop with confidence:
Boat & Barge Professional Gloss is a protective, decorative paint designed to give long term, durable protection to your boat surface. With superb wet edge and flow out, this paint is ideal both for larger surface areas and also for the fine lines and artwork involved in boat detailing and narrow boat painting.
A versatile, water resistant, solvent borne paint that is suitable for both wood and metal. This makes it an excellent coating for narrow boats, canal barges and other boats or cruisers.
Boat & Barge Professional Gloss is a high gloss marine enamel paint, based on vinyl toluene modified alkyd resin. It dries to a hard finish and is touch dry in 2 hours. Use Boat & Barge Professional Gloss over selected primers from Palatine’s range including red oxide primer and anti-corrosive metal primer or over previously painted surfaces.
Boat & Barge paint is best applied by brush or roller, but can also be sprayed. If spraying, dilute with no more than 10% of white spirit). Boat and barge gloss has been used for many narrowboat restorations, which can be seen on waterways around the UK.
Highlights:
- For interior and exterior use
- Marine top coat paint for use on wood, metal and many other surfaces
- Durable, high gloss protection for boats, canal barges, narrow boats and more
- Based on vinyl toluene modified alkyd resin, (lead free) containing organic and inorganic pigments
See our other products aimed at helping you keep your boat or yacht in tip top condition. Hulls – Black Bitumen, Bodywork – Boat and Barge Gloss, Woodwork – Yacht Varnish, for metal areas – etching primer zinc rich primer, followed by your choice from our top coats. Our Chlorinated Rubber Paint is also widely used by boat owners.
We are a proud member of the British Coatings Federation.
Colours Available: BS 381C, BS4800 and Ral Classic range.
Pack Sizes: 1 Litre, 2.5 Litre, 5 Litre, 20 Litre
Coverage / Drying Times:
Surface Dry: 2 hours
Hard Dry: 8 hours
Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Product Documents
9 reviews for Boat & Barge Professional Gloss
Add a review
Related products
Solvents & Thinners
From: £8.54
Exterior Wood Paint
From: £6.29
Garden Gate Paint
From: £9.00
Exterior Wood Paint
From: £9.08
Wood Primer Paint
From: £9.45
Floor Paint & Coatings
£6.57
Farm Oxide Paint
From: £5.90
Decorative Paint
From: £10.35
Gary knowles (verified owner) –
I’m very happy with this product
One coat finish as stated
I will definitely use again
bubblesforkids (verified owner) –
WOW impressed yet again.
Needed a stronger Red gloss and this is just perfect, and the finish is 1st class just what we needed. Away to order more colours for our exterior chalkboards
Paula –
Superb paint great coverage
Ron smith –
Excellent quality, Cobalt blue gloss lays off well and drys to a high gloss, excellent value.
phil ackers –
good quality item
Graham Starkey –
good quality
John Wheeler –
Very glossy paint. Gives good coverage
Steven Robinson –
superb quality
Julian Harvey –
excellent quality paint. many thanks : )